Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where a simple to match, high torque result is required. Great for student based projects which includes robots and buggies.
The unit has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The engine is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where high torque is certainly desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them ideal applicants for the DRV8833 motor driver carrier. Motor overheating can be due to worm motor excessive stalling, also at very low voltages. We advise that you utilize stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on small threaded end of the shaft, though it is not specifically intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors set new criteria for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration at this point and a truly future proof alternative. The Ever-Power gear engine offers total flexibility in mounting choices includes shaft, base, encounter, and flange solutions. The motor terminal box could be mounted in alternative positions rotated in 90º steps around the electric motor frame offering for unparalleled integration options.
Ever-Power gear motors adhere to North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total option for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be utilized outside or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the output shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a corner turn, optional dual result, or an inability for the motor to be back driven. The DC correct angle gear motors are designed for continuous and intermittent duty operation. Our right angle gear reducers are designed with many mounting plate options, making them well suited for a number of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a little package size. Worm Gear Motors are great for applications that want a personal- locking or breaking feature because the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chair / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Items will continue to work with you to design and produce a Worm Gear Electric motor which will optimize the functionality of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for durability and a higher torque output. Because of 
the special mechanical structure of the worm drive the engine output shaft is definitely self locking and may not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially show their power in applications where high gear ratios are essential. Our worm geared motors are consequently optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors can be quickly and effectively adapted to meet your needs.
Worm gear devices impress with their high power density and small style. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
As well as the basic EP housing, you can expect an extensive line of bolt-on components to customize the product including torque arms, shaft covers and output flanges. These can be very easily field set up, but we will also be glad to assemble the individual components for you.
Discover more about our modular SI worm geared motors!
Find out more
Even and Clean: The EP worm gear unit SMI
SMI worm gear systems feature a even, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes this product ideally suited for severe and challenging industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units possess on all sides different repairing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are created in light weight structure out of aluminium die cast. Electric motor attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where an easy to match, high torque result is necessary, nylon housing and gear, requires light essential oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most suitable for applications where an easy to fit, high torque result is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The engine is Gear DC electric motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that’s, regarding motor without electric, the output axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option when compared to spur gear motor. How come worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs output shaft) is not reversible when working with large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually a single start (a single spiral) worm is used. This can be an advantage when it’s desired to eliminate any possibility of the result driving the input.”
In other phrases, it is difficult to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
