1.A connecting website link of an O-ring Chain for standard application is pre-coated with grease at the pins. Prior to connection, confirm the grease to the surfaces of pins, and if the quantity of grease is smaller, apply grease with bare hands. (If gloves are used, the grease will be absorbed through the gloves.)
Instance: Once the connecting hyperlink (I) of an O-ring chain for basic application is
shipped, O-rings are fitted on the roots in the pins. When the O-rings come loose as a result of vibration during transport, refit the O-rings in towards the roots from the pins.
In this instance, be sure you return the grease collected on the roots on the pins to your central surfaces from the pins, more at portion A than at portions B proven inside the over illustration. (Portions A is worn as a consequence of sliding using the bushings.)
two.The chain is often most easily connected to the teeth of a sprocket. Engage the links at the two ends of the chain with the sprocket teeth and match connecting pins. When the sprocket might be moved, the chain can also be connected over the loosened side.
3. Connecting process
one.Verify that O-rings are connected towards the roots with the pins.
2.If the volume of grease applied within the connecting pins is smaller, coat the pins with grease at the central portions.
three.Insert the connecting pins into the bushings on the inner hyperlinks at both ends.
4.Verify that the grease is applied towards the entire encounter of your O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and although pressing the connecting plate, set up the spring clip. Verify whether or not the head (the finish with no split) of your spring clip is turned during the feeding course with the chain. (See the following illustration.)
six.Make sure you confirm the spring clip is securely fitted during the clip grooves from the connecting pins.
This completes jointing with the connecting website link. Note that grease on the surfaces of connecting pins and O-rings can be eliminated during installation perform. In this case, re-grease utilizing the grease within the surface of your base chain or the grease during the polyethylene bag by which the connecting website link was contained.