We are committed to research and advancement of goods that meet up with the increasingly superior electronics industry and are trusted in computers, kitchen appliances, consumer electronics, communications, facts, industry, medical and other fields.
We also Pto Adapter china offers patent for 360 level AC PIN interchangeable type adaptor in fact it is leading the world’s unique design.

Ever-Power provides goods which are small, lighter, more vitality efficient, and easier to use.
We selling products all over the world and receive the certifications for every of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet the latest regulations.
Gear adapters install between the vehicle transmitting and power take-off, and will serve several purposes. Mostly, adapters are used to change the route of rotation of the PTO output shaft. They can be applied to space the PTO out and away from the transmission case. On some imported or non-SAE common transmissions they allow for the mounting of common 6-bolt power take-offs. Gear Adapters can be found to match most popular transmissions.
Numerous body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Suits PTO rotation to that of the driven equipment
Standard and nonstandard bolt patterns: Fits SAE standard PTOs to non-standard transmissions

• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates from skid steer hydraulics
• Requires a the least 16 GPM; maximum of 22 GPM (produces 20 to 40 HP from the power take off)
• You don’t need to modify electric power take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with motor, hydraulic hoses and smooth faced couplers
• Ideal for three point power take off equipment – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches give a safe methods to protect operators and costly machinery from scenarios when the inertia of PTO influenced apply exceeds and over-operates the tractor PTO velocity. When this happens, the over-operating coupler will free-wheel
smoothly and properly. Over-running clutches will normally tolerate applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Severe shock loads or drive line angularity will reduce this capability
If the distance of your PTO does not fit flawlessly within a tractor, a PTO adapter can extend the size without having to replace it for a fresh one. This adapter comes with an overall length of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional length on the finish of your PTO. This tractor PTO shaft adapter offers both a female 6 spline end and a man 6 spline end, each end includes a diameter of 1-3/8 in. This allows more connection options and is perfect for anyone that owns an older tractor because the older parts may not be produced any longer and so are less common.
The over-running coupler is an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run traveling source. The coupler drives solidly from tractor to put into action and free wheels easily when put into action exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or Three Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect match for your Shop Dog. It might be easily carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall length of 6-3/8″ and is rated for tractors up to 70 HP.