Single and dual reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power input from high acceleration, low torque sources to deliver decreased speeds at increased torques. The input part has standard SAE pads for electric motor mounting. Obtainable in the three output configurations proven below. Many units could be furnished with an integral parking brake.
One reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input velocity is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Units provide 95% power transmitting efficiency.
Wheel Drive
Input side has standard SAE pads and Plastic Gear Rack splined input. Output aspect has hub for installation vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and high temperature treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut provides the best in shaft retention and 
shaft power. Output could be a spindle shaft or various sizes of essential pinion gears.