The EP Series Helical Bevel Reducer provides unmatched performance, durability, and design flexibility. This unit offers torque capacities up to 20,000 Nm (14,750 ft lbs).
The cat4CAD software allows simple interactive product collection of the entire gearbox and gear-motor system. Cat4CAD supports you in choosing and configuring the products, provides you the opportunity to print out considerable technical data bedsheets, and generates complete 2D drawings and 3D models for direct download.
11 sizes
Insight power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty class F insulated motor windings
Class 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and better torques in smaller sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, installation pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For optimum rigidity, universal installation on five sides or via a torque arm.
Worldwide Motor: Multiple leads and windings for globally multi volt/Hz requirements plus modular design to simply accept brakes, encoders or pressured cooling.
High efficiency motor design available
Innovative self-locking, self-aligning taper shaft electric motor connection
Gearbox supplied factory filled up with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple locations (Optional OtN2000)
Double lip seals upon heat treated, plunge ground shafts
Shaft mounting options include tapered bushings designs
This is a comprehensive offering of energy-efficient, right angle helical bevel enclosed gearing. It really is available as gearmotors and a number of reducers with torque capacities up to 119,000 inch pounds. Housing styles include footed, face and flanged configurations. Gearmotors can be found in three stage high efficiency designs through 50 HP and single phase to 5 HP. We provide a variety of input and result shaft choices. Additionally, you will find fixed and variable quickness motors and range of ratios obtainable in this product offering.
Features
Accommodates input power from ¼ Hp to 75Hp
Torque ratings up to 119,489 in-lbs
Decrease ratios up to 7,500:1
Helical – bevel – helical gear train offers cost effective high and low speed solutions
Up to 94% efficient
Four input possibilities for all units
Two output flange options – B5 and B14
Multiple output shaft interfaces
Crucial dimensions interchangeable with main competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
DURABLE Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the growing and varying needs of customers, we offer an array of Helical Bevel Gear Reducers. The technological articles of our products allows for an extraordinary efficiency/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we offer are successfully found in a multitude of commercial and civil applications. These are B-Series units which offer excellent value for money and output torque/weight ratio, especially considering that they need not a lot of servicing. Besides these, our products are available in cast iron (sizes 063 to 163) or aluminum (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for electric motor coupling, IB with input shaft, CB with compact motor, PB-fitted for electric motor coupling with flexible joint
Casing with feet FC, flange SC and common UC
Power up to 90 kW
Gears hardened and tempered with shaved or ground profile
Gearing with 3 decrease stages
Gleason spiral bevel gear pairs with run-in profile, mounted as second decrease stage for an increased resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-strength casings optimized with FEM analysis and input and result flanges of grey cast-iron G200 to ensure top level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue helical bevel gear reducer epoxy-polyester powder
Accessories: torque arm, result flange, result shaft, shrink disk, backstop device, protection cover kit, viton oil seals, reinforced result, assemble/disassemble kit
Series EP right position helical bevel gear motors provide ratios from 8:1 to 160:1 in three levels or up to 10000:1 in five phases. Motors can be found up to 90kW and output torque capacity up to 12,300 Nm.
The series EP helical bevel gear motor was created with integral cast feet for base or end mounting and can be offered with single or dual extended output shafts.
Models are also available because shaft mounted or with output flanges and are designed for mounting horizontally or vertically. The products can also be offered with a bolt on torque response bracket and all variants can be found possibly motorised or with an insight shaft assembly.
Adding to the new selection of Ever-Power helical equipment motors the product takes benefit of our many years of accumulated design expertise together with the use of top quality materials and parts. The outcome is a number of speed reducing geared motors providing high load holding capacities, increased efficiency, peaceful running and reliability.
Features of Helical Bevel Gear Motor
Standard motor connection
Ability to fit double essential oil seals, on input and output shaft because required.
All devices are dimensionally interchangeable with various other major manufacturers.
Units are manufactured and assembled from a family of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units could be fitted with a backstop module and reducer Devices can be fitted with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are found in industries such as chemicals, pharma, packaging, food processing, plastic-type material and automation etc.
Key Features:
Sizes: A40-A50-A70
Offered versions: EP – fitted for engine coupling, IEP – with input shaft, CEP – with compact motor
Cases with foot, flange or universal
Switch on to 4,8 Kw
Gears with shaved or floor profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Superb mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in in accordance to DIN 1843
Accessories: torque arm, result flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission device and composed of Y series motor, helical gear,Arc gear and worm gear. The gears are constructed with high wear-resisting alloy components, specially and finely processed.
Advantages:
1: Helical-bevel equipment two-stage reducer
2: Compact structure, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Small design, small volume, nice appearance ,and solid capacity to be overloaded.
6: Precise division and wide range for transmission ratio.
7: The effectiveness is up to because high since 96% with low energy usage, strong adaptability and is capable of functioning continually in corrosive or damp environment.
8: All- purpose make use of, convenient and low-cost maintenance.
9: New seal device, strong adaptability.
10: Varied range of motor combinations, mouting positions and struture projects.