• Engine gearboxes are maintenance-free, small power sources for driving vent, display, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase options for your own needs.
• Key feature of these drives are a self-braking worm equipment transmission and an integral linear limit switch device.
shaft-installed gear motors are comprehensive electromechanical drives in which the speed of the installed electric motor is reduced to the required value using two to four reduction stages. The drives are powerful and durable and feature a concise and lightweight design.
The compact design is manufactured possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent weight reduction compared to commercially offered drive motors. That is attained through the consistent application of light weight aluminum die casting technology, which ensures a high amount of rigidity for the apparatus and motor housing simultaneously.
Each drive is produced and tested specifically for each order and customer. A advanced modular system allows for an excellent diversity of types and a optimum amount of customization to consumer requirements.
Thanks to their integrated control models, the shaft-mounted gear motors are the ideal drives for applications in reversing mode. In both rotation directions, defined end positions are shielded by two position limit switches. This uncomplicated answer does not just simplify the cabling, but also makes it possible to configure the end positions quickly and easily. The high shut-off precision of the limit switches guarantees safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electric panel, it can run and stop after set amount of turns. Then it can open and close the windows for greenhouse ventilation to right positions.
To keep the delicate environment in the greenhouse, climate control systems certainly are a necessity. Numerous mechanical systems could be applied in this respect; however glass vent drive systems have a tendency to be the most popular. The drive system includes a central gearmotor connected to a 40:1 correct angle reducer with dual result shafts. These OP shafts connect to lengthy jack shafts that spread over the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open and close large cup windowpane panes in the ceiling for temperature control.
With respect to the size of the application form (length of the shafting, amount and weight of the windows panes) we provides two gearmotor Greenhouse Gear Motor solutions from a modified version of their 200 series parallel shaft series – 1/5 HP and 1/20 HP. The application form Is generally intermittent in use; however the motors are rated continuous because the glass pane home windows may potentially be under continuous, subtle adjustment during the day.
Gear Motor, also called Engine Gearboxes, is a particular type of electrical motor that’s designed to produce high torque whilst maintaining a minimal horsepower, or low swiftness, motor output. Equipment motors can be found in many different applications, specifically for the greenhouse, livestock and agricultural industry, our motors can be found options to use roof vents, wall structure vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment mistakes and can be very easily taken out without disturbing the entire shaft.
shaft-installed gear motors are finish electromechanical drives where the speed of 
the installed electrical motor is decreased to the desired value using two to four reduction stages. The drives are powerful and durable and feature a concise and lightweight design.