Our standard 700 Series – the heart of Ever-Power rate reducer products – has been serving industry reliably for over 10 years. Its proven modular style has set the industry standard for performance and is the most imitated product in the current worm gear swiftness reducer marketplace. But why accept a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting flexibility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes have earned a status to be a business benchmark worldwide. Our success originated from our relentless drive for quality with state-of-the-art technology, all while offering worm gearboxes are affordable prices. High flexibility accorded through a broad choice of mounting options, shaft configurations and engine interfaces, makes the Ever-Power worm gearbox the default choice for the market. The helical-worm and the double-worm version, with or without the torque limiter, soon add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low velocity gear ratio. Being simple and compact in design, these gears can perform higher gear ratio than the helical gears. These worm reduction gears having screw type characteristics act like helical gears, but its helix angle is typically comparatively larger) and its own body is generally quite lengthy in the axial direction. The gears in these gearboxes can be right or left-handed depending upon the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (single or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a type of interlocking gear composed of a worm shaft and worm wheel. The worm is usually shaped like a screw and the worm wheel is usually a type of gear machined to possess a tooth profile with the same configuration.
The operation of a worm gear is comparable with that of a bolt and nut. The principle is equivalent to a nut that has been fixed so that it cannot rotate and for that reason progresses in the axial direction when the bolt is turned.
The design of a worm gear is considered through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Because of this, in a 1 speed decrease gears, the wheel could be manufactured therefore that it will be rotated 1/60 (1/120 in particular applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature makes it possible to layout the turning tranny direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation direction of the worm wheel by changing the screw direction.
A multitude of shaft layouts The wide selection of shaft layouts is among the top features of interlocking gears.For example, right shaft output, left shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Physique 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is certainly characteristic because the contact is linear and the relative slide is fantastic. In comparison to rolling power transmission, sound and vibration are really low. For this reason, this technology is used to drive medical equipment, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1~1(at an input of 1800 rpm)
Output torque(N・m) 20~66
Input speed(rpm) 0~1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4~30(at an input of 1800 rpm)
Output torque(N・m) 900~3570
Input speed(rpm) 0~1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3~255(at an input of 1800 rpm)
Output torque(N・m) 50~56600
Input speed(rpm) 0~1800
Key points when choosing a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the correct gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care should be taken in important areas such as for example selecting the load index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm decrease gears, the heat produced through the initial period of use is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is paramount to sufficiently attaining the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it’s important to change the lubricating oil and also to change the lubricating oil from then on about 1 time each year according to the procedure manual offered by the manufacturer.
Product Description
The Worm Reduction Gear Box is supplied by our company is of supreme quality. Our products are made through the use of premium quality material and enhance technology at our vendors end. These are widely used in various sectors. Our items are often available at an extremely low market prices.
Motor Mount Frame Options
TEC Motors, worm reduction gearbox.
Option A-160 B5 Body, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Mount.
High efficiency and secure operation. High load capacity and overload functions. Output Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios available on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the sector worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute flexibility is given by the wide choice of several installation options, shaft configurations and motor interface, all offered as regular. The helicalworm and the doubleworm edition, with or without the torque limiter, also add up, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) provides great versatility to suit a broad selection of applications and provides higher efficiency than the compact collection XC, where in fact the emphasis is on space performance.
Series H supplies the same features since series X with an added plus: a spur gear pre-stage at the input end provides higher performance and a broader selection of ratios compared to the X series.
Frame sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy metal and ground-finished.
The worm wheel Worm Reducer includes a cast iron hub with cast bronze insert. Hollow result shaft is supplied as standard.
Broad range of possibilities:
second input, output flange, single or double extension result shaft, torque limiter with through cable, torque arm.