Worm get gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to fit, high torque productivity is required. Ideal for student based projects which includes robots and buggies.
The machine has been designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap fitted into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little strolling robots, lifting mechanisms, and other applications where excessive torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, actually at suprisingly low voltages. We advise that you utilize stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on small threaded end of the shaft, although it is not particularly intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors set new specifications for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration at this point and a really future proof remedy. The Ever-Power gear engine offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The electric motor terminal box can be mounted in substitute positions rotated in 90º steps around the motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors adhere to North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total option for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be utilized outside or in wet and dusty conditions without the usage of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a part turn, optional dual output, or an inability for the engine to be back driven. The DC right angle gear motors are made for continuous and intermittent duty procedure. Our right angle equipment reducers were created with several mounting plate choices, making them perfect for a variety of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a little package size. Worm Gear Motors are excellent for applications that require a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Also, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision lower gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Devices / Security Gates / Teeth Chair / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with one of our Worm Gearheads. EP Items will work with you to create and produce a Worm Gear Motor that may optimize the performance of your unique application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for durability and a higher torque output. Due to the special mechanical framework of the worm get the electric motor output shaft is definitely self locking and can not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Ranked voltage is 12v and can attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their power in applications where high gear ratios are essential. Our worm geared motors happen to be as a result optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors can be quickly and efficiently adapted to meet your needs.
Worm gear devices impress with their great power density and small design. If required, we can also supply them with the impressive nsd tupH surface area treatment.
In addition to the basic EP housing, you can expect an extensive line of bolt-on parts to customize the product including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be glad to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear products feature a soft, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product preferably suited for harsh and challenging industries like meals processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides numerous fixing possibilities and enable a simple assembling for the client.
Other drive configurationscan be created by use of built-about accessories (e.g. torque arm and result flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised in general through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm no load rate, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm huge, 40mm high, a robust worm travel gearbox powered by an MM28 engine (included), most ideal for applications where a simple to match, high torque end result is required, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, perfect for student based tasks including robots and buggies.
Most ideal for applications where an easy to fit, high torque result is required
Ideal for student based projects including robots and buggies
Reversible Huge torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC electric motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electric, the productivity axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where substantial holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option compared to the spur gear motor. How come worm gear so particular? Check this wiki out: Worm Get.
“Unlike with ordinary gear trains, the path of transmission (input shaft vs result shaft) is not reversible when using large reduction ratios, due to the better friction involved between the worm and worm-wheel, when usually an individual start (1 spiral) worm can be used. This can often be a advantage when it’s desired to remove any possibility of the output driving the input.”
In other terms, it is challenging to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

If you have any type of questions concerning worm motor, maintain reviewing our specialists’ write-ups.