Hanging Pulleys designed for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and tackle systems. They require about 50 % the pressure of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Acetal, nylon, and light weight aluminum are lightweight and corrosion resistant. Stainless may be the most corrosion resistant.
Designs C, D, and J possess a bracket on underneath for tying off one end of a rope.
Style K reduce the force needed to keep your load set up. Unlike standard pulleys, these possess a V-groove for more grip on your rope, plus they ratchet when under load so they won’t slip in the various other direction. Pulley for3/8″ dia. rope can be arranged to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Install these pulleys to a set surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal and light weight aluminum are light-weight and corrosion resistant. Galvanized steel is usually more corrosion resistant than iron and steel. Stainless steel may be the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless is definitely more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Mount these pulleys to a set surface to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Stainless steel can be more corrosion resistant than steel.
Hanging Pulleys meant for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the pressure of a single-groove pulley to move the same load. They have got a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Nylon is much lighter than metal. Aluminum is definitely corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang in your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end isn’t needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys possess a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Attach these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move an individual load, such as block and tackle systems.They are able to reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys pertaining to Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the force of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Style E pulleys have bracket upon the bottom that enables you to tie off 1 end of your wire rope.
Warning: Never make use of to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a totally free rope end isn’t needed.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the drive of a single-groove pulley to go the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never use to lift people or items over people
Hanging Pulleys to get Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as block and deal with systems. They are able to reduce the force had a need to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Style A pulleys possess a bracket on underneath for tying off one end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a free rope end is not needed.
Warning: Never use to lift people or products over people.
