The EP Greenhouse gear driver is a compact and lightweight reduction reducer with an integrated limit switch system that is ideal for assembly of a locally available electric motor. The gear reducer can be used in manually-controlled or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear reducer is definitely rainproof and windproof. The geared motor has a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is certainly locked when the reduction gear reducer isn’t running. The completely sealed reduction gearbox comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all situations, even at high temps. Thanks to the utilization of an growth chamber, the gear motor could be installed in any placement. There are no restrictions, since there is no dependence on a bleed plug. The sealed reduction geared motor keeps the apparatus oil of the gear reducer in ideal condition for its entire operating lifetime. The gearbox is suitable for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction reducer has an FT85 motor assembly flange, to which a suitable IEC standard motor can certainly be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an integrated chamber and is usually enclosed by an impact-resistant plastic material cover. The limit change system is obtainable and easy to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).