Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive as high as approx 270 degrees for example on camera focus rings. They also provide an economical alternative where a big gear is required or a longer stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear motion applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing can be applied just within the tooth area. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Heat treated ground gears with high precision and power has excellent cost-performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated simply by carburizing. Has high-power, high wear resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, long life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and face width sizes, more compact and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and amount of teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and number of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and amount of tooth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications because of its flexibility, where steel racks do no possess this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Information Rails for Molder Versatile Racks.
We offer as standard a wide range of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic material) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials can be found on ask for. Moulded Hostaform Racks can be found to offer an economical alternative where less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the system of a versatile rack and equipment, a rotational joint actuator called vsaFGR can be proposed to regulate the joint stiffness. The flexible gear rack can be regarded as a combination of a nonlinear elastic component and a linear adjusting system, providing benefits of compactness. The joint stiffness is in the range of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the gear displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with regards to the flexible equipment rack is usually perpendicular to the joint loading push, so the power necessary for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive of up to approx 270 degrees for example on camera focus rings. They also provide an economical remedy where a large gear is required or an extended stretch (up to 2 metres) of linear motion is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear motion applications. You can expect a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is certainly applied just within the tooth area. J Series products are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Heat treated ground gears with high precision and strength has excellent cost-performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ 
Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and face width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and number of tooth. J Series items are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and quantity of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and number of teeth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic material Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal movement. S Type is easy to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is necessary.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications due to its flexibility, where metallic racks do no possess this attribute. Pinions and add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Instruction Rails (ARL) : Information Rails for Molder Flexible Racks.
You can expect as standard a wide selection of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres in length. Stainless Steel and Delrin (Plastic-type) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials are available on ask for. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Based on the system of a versatile rack and gear, a rotational joint actuator called vsaFGR is proposed to regulate the joint stiffness. The flexible gear rack can be regarded as a combination of a nonlinear elastic element and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness is definitely in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with regards to the flexible equipment rack is certainly perpendicular to the joint loading drive, so the power necessary for stiffness regulating is really as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
