Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is generally electric fan motor china detached as observed in the photos. (Find “Control Notice” below for alter type.)
T (See “Application Notice” below for utilize in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” lengthy with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). If you order several electric motor at the same time, we can do our better to supply your purchase with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan software. This is a completely enclosed fan electric electric motor and made to have continuous ventilation over the electric motor casing for cooling. The housing isn’t vented and the electric electric motor will overheat and enter automated thermal overload if operate in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools 
back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the electric motor and lead it to proceed into automated thermal overload. (Your lover blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric engine is manufactured in China.